Motor Stator Recycling Machine for Scrapping Electric Motors

Bluedog International / November 21st, 2019

Introducing the best Motor Stator Recycling Machine
from Bluedog Wire Strippers

The motor stator recycling machine is designed to recover the copper from scrap electric motor stators.  The BMC-20 Winding Puller can efficiently dismantle scrap motor stators with a diameter ranging in 3 inches to 20 inches.  By greatly improving economic benefits, the BMC-20 Winding puller is suitable for batch processing for metal recycling companies who want to take advantage of the copper in scrap electric motors.

Bluedog  Wire Strippers is the #1 Source for Motor Recycling and Dismantling Machines in North America

Before you can use the BMC-20 Dog Bite motor recycling machine you must dismantle the motor front and rear face.  Cut off all the wire leads, and pull out the Shaft.   Then you just crack the case so you have left with the bare stator.

Features of the BMC-20 Dog Bite Winding Puller:

1.  Highly Efficient Design for pulling out scrap copper windings in bulk
2.  The copper recycling rate is 100%.   After Stator has been cut using the BMC-20 Winding Cutter machine, the BMC-20 Winding puller will extract all copper windings from the stator.
3.  Does not damage the silicon steel case, improving its recycling rate
4. Suitable for all different stator types and style of Electric Motors

The Ultimate combination of BMC-20 Winding Puller and BMC-20 Dog Bite Stator Cutter: for processing scrap electric motors.

To efficiently dismantle the Motor stator recycling machine consists of two machines, copper wire cutting machine and copper wire pulling machine.  Copper wire cutting machine is used to cut on the end of the copper windings in the motor stator, while the copper wire pulling machine is used to pull copper winding from the motor stator.  These two machines combined together give you the perfect combination for Scrapping Electric Motors.

How do you operate the Motor Stator Recycling Machine?

In order to recover the copper wire from the motor stator, first, you have to use the copper wire cutting machine to cut one end of the copper winding on the stator.   Then you put the cut motor stator on the lifting platform of the copper wire pulling machine and let is rise to the batter board through the switch button. After the motor stator is position, use the ton of the pulling head to drag out the copper wire.

Scrap motor recycling tip:

The diameter of a 3/4 HP motor is about 3 inch in diameter
The diameter of a  50 HP motor is about 20 inch in diameter

Notably, the larger the stator size the larger the amount of scrap copper that can be extracted.

Technical parameters of a scrap motor stator recycling machine:

BMC-20 Winding Cutter Machine –        5 HP x 240v x 3PH x 60 HZ
BMC-20 Winding Pulling Machine –   7.5 HP x 240v x 3PH x 60 HZ
Related news:

How to dismantle scrap electric motors

If you are interested in purchasing a machine for dismantling scrap electric motors. Please call us:  866-901-2278 – Bluedog wire strippers.  We have these machines in stock in our North American warehouse.

Bluedog Recycling Equipment
“Don’t scrap it, Extract it!”